Setting Up Your MN Series Time Clock

    If in the event that the password for your MN1000/2000 timeclock needs to be changed, the following steps will guide you towards that process.

    Changing the MN1000/2000 timeclock password:

    1. Tap the button labeled ‘MENU’, where it will then prompt you to then “Input Password”; type in the administrative password used for the clock and then tap the 'OK' button.
    2. You'll have several different options displayed; tap the option labeled Device.
    3. You should now have several different menu options to select from. Select the one labeled Change Password where it will then show two additional options: Change Admin PasswordChange Super User Password.
    4. Tap the password option you intend to make changes to. Whichever you pick, it will then prompt you to input the new password twice.
    5. After inputting the new password twice, it will then take you immediately back to the prior menu. You should now be able to use the MN1000/2000 clock with the updated password(s).

    To remove a time clock from your account, follow these steps:

    1. Click the Settings tab on the main menu.

    2. Click the Punch Management link.

    3. From the list, click the red X that appears next to the name of the time clock.

    You will be prompted to confirm that you wish to remove the time clock.

    To link the MN1000 to your uAttend account, follow these steps from your uAttend account:

    1. Attach an Ethernet cable between the MN1000 and your router, then plug the MN1000 into a power outlet.

    The MN1000 should be turned on, with the display illuminated.

    2. Log in to your uAttend account, if you are not already logged in.

    3. Click the Settings tab on the main menu.

    4. Click the Punch Management link.

    5. Click Add Time Clock.

    6. In the Device ID field, enter the Device ID assigned to the MN1000.

    You can find the Device ID on a sticker on the back of the MN1000. If you cannot locate this sticker, you can also find the Device ID in the time clock. To do this, press the MENU button and enter the custom admin password. Select Device Management, then select Device ID.

    Be sure to enter the complete Device ID. An example of a Device ID is MN1000-12345678.

    7. In the Name/Location field, enter the name for the MN1000.

    8. Click Add.

    The MN1000 will now be linked to your uAttend account.

    To link the MN2000 to your uAttend account, follow these steps from your uAttend account:

    1. Attach an Ethernet cable between the MN2000 and your router, then plug the MN2000 into a power outlet.

    The MN2000 should be turned on, with the display illuminated. 

    2. Log in to your uAttend account, if you are not already logged in.

    3. Click the Settings tab on the main menu.

    4. Click the Punch Management link.

    5. Click Add Time Clock.

    6. In the Device ID field, enter the Device ID assigned to the MN2000.

    You can find the Device ID on a sticker on the back of the MN2000. If you cannot locate this sticker, you can also find the Device ID in the time clock. To do this, press the MENU button and enter the custom admin password. Select Device Management, then select Device ID.

    Be sure to enter the complete Device ID. An example of a Device ID is MN2000-12345678.

    7. In the Name/Location field, enter the name for the MN2000.

    8. Click Add.

    The MN2000 will now be linked to your uAttend account.