Time Clock Management

    System Settings provides the following services:

    • Volume Control

      To adjust the volume of the time clock, slide the volume control to the right to increase volume, or slide the volume control to the left to reduce volume. Sliding the volume control to the far left position will turn off the sound completely.  The setting of the volume control will be used for all sounds emitted from the time clock.

    • Screen Brightness

      To adjust the screen brightness of the time clock, slide the screen brightness control to the right to increase brightness, or slide the screen brightness control to the left to reduce brightness. Sliding the screen brightness control to the far left will significantly decrease the brightness of the screen, although the screen will still be visible.

    System_Settings.png

    There are two ways to connect your Citadel time clock to the Internet—via WI-FI or Ethernet. Both sets of instructions are listed below.

     

    Connecting via WI-FI

    To connect your time clock via a WI-FI, follow these steps:

    1. Access the admin menu (enter pin number 253928)

    2. Select time clock management.

      Network_1.png
    3. Select network settings.

      Network_2.png

    4. Select WI-FI.

      Network_3.png

    5. A list of all WI-FI networks that the time clock detects will appear.

      Network_4.png

    6. Select the WI-FI network you want to connect to.

    7. If your WIFI network requires a password, enter the password.

      Network_5.png

      Network_6.png

      Network_7.png

    8. Tap join and the time clock will connect to your WIFI network using the credentials you supplied.

    9. You will receive a success notification once you are connected.

      Network_8.png

      Network_9.png

    Connecting via Ethernet

    To connect your Citadel time clock via ethernet, follow these steps:

    1. Access the admin menu (enter pin number 253928)

    2. Select time clock management.

      Network_10.png
    3. Select network settings.

      Network_11.png

    4. Select ethernet.

      Network_12.png

    5. If the time clock has not connected via ethernet yet, the clock will display instructions. Plug in your ethernet cable in the ethernet port located in the back of your time clock if you haven't yet.

      Network_13.png

    6. Once the ethernet connection is established, you will see a success notification. This can take a few moments.

      Network_14.png

     Updating your Citadel time clock will allow you to receive all the new features and enhancements we have released. To update your time clock, follow these steps:

    1. Access the admin menu by entering the following pin: 253928.

      Update_2.png
      Update_1.png

    2. From the admin menu, tap time clock management.

      Update_3.png

    3. Tap update software.

      Update_4.png

    4. If there is an update available, an option will display that says update software. Tap the button to start the update.

      Note: If your time clock is up-to-date, it will say "Your Software is Up to Date"

      Update_5.png

    5. The update will restart the system. Your time clock is now on the latest version. To check your software version, repeat steps 1-5 above.