Using Time Clock Keypads
The following switches and buttons can be found on the time clock keypad.
Switch | Function |
Set | Enter and exit the setup mode (- / 0) |
Button | Function |
+ | Increase value |
- | Decrease value |
Enter | Confirm set value |
Back | Backspace the set value |
Clear | Cancel the set value |
Reset | Restart the time clock |
HN2000/HN4000 (top view)
HN2000/HN4000 (side view)
Using Time Clock Menus
To access the menu options of your time clock, remove the cover of the time clock using the enclosed key. Then move the Set switch to the "0" position (to the right).
Setup features of the time clock are grouped by menu options. The main menu options are numbered HN 1 through HN 5. Each menu has sub-menus called codes, which are displayed in a smaller size at the bottom left on the clock display.
When a code is flashing, you can make changes using the + and - buttons. Once you select the option you wish to set, push the Enter button.
If you would like to scroll through codes without changing settings, push the Enter button.
The Back button allows reconfiguration of an option that was confirmed incorrectly.